2" 3" 4" Lift Front 30mm Drop Diff Drop kit Direct Bolt In for Hilux Vigo Kun26R

When lifting IFS Vehicles, the Constant Velocity (CV) joints are put on an increased angle. This increased angle of the CV joint during operation can accelerate the wear on the joint, as well as putting additional stress on the CV boots leading to splitting and eventually premature failure of the CV. This wear is accelerated further if larger (wider) wheels and tyres are fitted.

• Application specific
• Supplied complete
• Corrects the geometry on the front driveshaft and CV's
• Lowers the front diff by approx. 30mm
• Reduces the angles the CV joints need to operate on
• Avoids the expensive replacements of CV's and boots

The Trupro Diff Drop Kits are application specific and supplied complete to get the job done. The bolt on kit corrects the geometry on the front driveshaft and CV's, lowering the front diff by approx. 30mm, thus reducing the angles the CV joints need to operate on, and avoiding the expensive replacements of CV's and boots.