Raw 4x4 Predator Shock Absorbers Coil Leaf 40mm Lift Kit for Mazda BT50 20-on

Mazda BT50 Ute / Dual Cab 2020 - on

Australia's terrain is some of the most diverse and demanding in the world.
This is why it is essential your 4x4 is equipped with the right suspension components. If you are considering fitting load bearing aftermarket accessories, travelling prolonged periods on corrugated tracks or just want to improve the performance of your 4WD you need to upgrade your suspension.

PREDATOR
PERFORMANCE SHOCKS & STRUTS

The RAW Predator range brings together on road prowess and off road durability into a fast acting monotube design. The Predator delivers that elusive feeling of comfort and control.

• 18mm diameter piston rod for extra strength and durability;
• 46mm bore size helps the shock stay cooler for longer under extreme working conditions;
• Heavy duty low friction seal package with a larger bearing surface, helps withstand additional side load in hard off road conditions and retain oil under extreme temperatures;
• Bump cap & wiper seal designed to keep dust and grime out;
• Alloy floating piston separating the oil from the gas inside the shock absorber,lighted and stronger improving overall response time & reaction speed of the shock absorber.

COIL SPRING

A set of RAW 4x4 coil springs will significantly improve the ability of your 4x4 to carry this additional weight whilst enhancing the vehicles performance in terms of stability, load carrying and towing capabilities.

• X5K high strength steel wire with superior resistance to sag;
• Formed on precision mandrels with state of the art heat treatment;
• Shot peened, fully scragged and load tested;
• Durable powder coated finish;
• Made in Australia.

LEAF SPRING

Leaf springs not only support the weight of your vehicle but position the vehicles axle and act as a torque rod to stop "axle wrap"upon acceleration.

• Drawn tapered &diamond cut leafs to aid in load distribution over a larger surface area.
• Inter leaf anti friction liners between the springs leafs to reduce friction and improve ride comfort.
• High strength alignment clips with nylon insulators to reduce wear and noise.
• Nyloc nuts are used to secure the clips to prevent losening which can lead to tyre damage.
• Two stage leaf pack for additional support when the vehicle is heavily laden.

POLYURETHANE BUSHES

Polyurethane bushes offer a longer service life than their rubber equivalents combining a blend of unique polymers to offer a higher level of wear resistance to extreme temperatures, salt water and petrochemicals.
Blend of Unique Polymers Offering a higher level of wear resistance to extreme temperatures, salt water and petrochemicals.
High Level of Memory When twisted or compressed out of shape they will return to their original design parameters.
Castor Bush Kits,the offset centre hole is used to increase or decrease the castor setting, this is to aid in steering and alignment

U-BOLT

Over time due to the high stress of holding the suspension and axle together, U-bolts can stretch in the threaded section, rust in harsh environments or if raising the vehicle a longer a U-bolt is sometimes required.
For a small investment a set of new U-bolts will give you peace of mind that your leaf springs are securely fitted to your vehicle.