Radiator & Heater Hose Kit for Ford Fairmont Falcon AU XR-8 Pursuit 5.0 5.6L

Note: eBay's compatibility table is not accurate in some cases. Please refer to the following information we have provided for you.Copyright© 2014 - 2024 Superspares. All rights reserved.

Contents : Superspares Radiator Hose + Heater Hose Set

Radiator Hose Details :

1 x Upper Radiator Hose(Length:800 mm;ID:33 mm;Bell ID:37 mm)
1 x Lower Radiator Hose(Length:840 mm;ID:35 mm;Bell ID:42 mm)

Heater Hose Details :

1 x Heater Hose Outlet(Length:810 mm;ID:14/16 mm) - Lhs Heater Valve Port To Engine
1 x Heater Hose Inlet(Length:600 mm;ID:15 mm) - Engine To Rhs Heater Valve Port
2 x Heater Hose Inlet & Outlet(Length:230 mm;ID:15/16 mm) - Heater Tap To Heater Core

SUIT :

The main role of a radiator hose is to connect the engine to the radiator and allow the coolant to run through the respective tank. The inlet tank is in charge of guiding the hot coolant from the engine to the radiator to cool down, then it circles back out to the engine through the outlet tank.This intricate system of hoses moves coolant from your radiator to the hottest part of your engine and then returns the overheated fluids back to the radiator to expel the heat and begin the cycle again.

Heater hoses are used to transfer the excess heat, in the form of engine coolant, from the engine into the heater core. Once the heated engine coolant reaches the heater core, it travels through small tubes inside the heater core.Then, the heater fan blows on the tubes, sending warm air through the heating vents and into your vehicle. The heater hoses will then transfer the heated engine coolant out of the heater core and back to the engine.

Features: Excellent resistance to high temperatures contact High quality connection and durable Tough construction for burst protection