Knipex Self-Adjusting Insulation Stripper - for Thin Ribbon Cables Length 200mm

Note: eBay's compatibility table is not accurate in some cases. Please refer to the following information we have provided for you.

Copyright © 2014 - 2023 Superspares. All rights reserved.

Contents : Knipex Self-Adjusting Insulation Stripper

• For thin ribbon cables up to 10.0 mm width in a single pass
• For single, multiple and fine stranded conductors with plastic or rubber insulation
• Adapts automatically to the respective cable cross-section; prevents damage to the conductor
• Cutting depth can be adjusted for different insulation materials
• With wire cutter for copper and aluminium wires, multiple stranded up to 10 mm² and single stranded up to 6 mm²
• Smoothly operating mechanism
• Stripping blades and clamping jaws easily replaceable
• Low weight
• Body: glass fibre reinforced plastic
• Blade: special tool steel, oil-hardened

• Weight : 202 g
• Dimensions : 200 x 95 x 21 mm
• REACH compliant : contains SVHC
• RoHS compliant : not applicable
• Stripping capacities in square millimetres : 0.03-10.0 mm²
• Length stop : 3 - 18 mm
• AWG : 32-8

Different single layer insulated conductors - one pair of wire strippers

Adjust by themselves. Insulate with one touch of the pliers. Protect the conductor

With these wire strippers, wire stripping is a piece of cake: insert cable, press the pliers handle, done. This self-adjusting wire strippers has been specifically developed for solid, multicore and finely stranded conductors of between 0.03 and 10.0 mm² with a single layer of insulation. Such small conductor cross-sections - as with thin flat ribbon conductors with a width of up to 10 mm - are predominantly found in the area of electronics. This self-adjusting wire strippers is therefore bought frequently specifically for work in electronics.

Straight blade for best work on single layer insulation

Single layer plastic insulation is perfectly cut with the blades that are straight and so run parallel to the conductors. The insulation is only cut as deeply as needed for removal of the insulation layer. Very fine and multicore conductors also remain undamaged when the Knipex 12 40 200 is used correctly. What is more, work using these pliers is very economical: the operating principle selected here permits a wide capacity range, although they are not suitable for highly flexible and reinforced insulation materials, but rather only for single layer insulated cable.

Save time and effort

Compared to conventional wire strippers and stripping blades, this self-adjusting wire strippers from Knipex require much less time and energy to be spent on wire stripping: less time because they adjust automatically to various cable cross-sections; less energy due to their smoothly operating mechanics and because they weigh just 202 g. The cutting depth can be adapted with just one hand movement for insulation materials with varying degrees of hardness.