Knipex Electronic Super Knips - Length 125mm with Lead Catcher INOX Tool Steel

Note: eBay's compatibility table is not accurate in some cases. Please refer to the following information we have provided for you.

Copyright © 2014 - 2023 Superspares. All rights reserved.

Contents : Knipex Electronic Super Knips

• With lead catcher - no uncontrolled loss of cut wire ends
• Cutting edge hardness approx. 54 HRC
• INOX tool steel
• Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics
• Ground, very sharp cutting edges without bevel
• Precisely shaped tips cut wires close to a surface from Ø 0.2 mm
• Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life
• Joint with stainless steel rivet
• Extremely smooth movement for minimum operator fatigue
• With opening spring and opening limiter

• Head : polished
• Handles : with multi-component grips
• Weight : 57 g
• Dimensions : 125 x 48 x 12 mm
• Standard : DIN ISO 9654
• REACH compliant : does not contain SVHC
• RoHS compliant : not applicable
• Cutting capacities medium hard wire (diameter) : Ø 1.0 mm
• Cutting capacities soft wire (diameter) : Ø 0.2 - 1.6 mm
• Jaw length (B) : 9 mm
• Jaw thickness (joint) (D) : 7.5 mm
• Head width (A) : 13.5 mm

Cut abutting, fine wire accurately - hold wire sections securely

Extremely sharp cutting edges made of stainless, air-hardened INOX steel

The Knipex Electronic Super Knips is made from surgical steel (INOX steel). The cutting edges are ground without bevel and hardened to approx. 54 HRC for flush cutting.

Accurately cut fine wires, e.g. that are touching enclosures and components, thanks to precision tips.

Work involving dexterity: low weight, smooth operation and wire clamp

Great dexterity is needed when working on electronic components and in precision mechanics. Due to its frictionless handle spring, the Knipex Electronic Super Knips is so smooth-running that energy can be metered out very precisely - with dexterity.

Opening springs and opening restrictor further simplify work. The integrated wire clamp prevents wire sections from springing back in an uncontrolled manner: a safety aspect, particularly when cutting wires in enclosures containing electronic assemblies.

A special detail ensures an accurate cut and long service life

These precision pliers have been designed so that the user is able to concentrate completely on his work, also when working continuously, without the need to consider the tool.

One special detail permits the most precise shear cuts on even the thinnest of wire, and at the same time gives the pliers a long service life: the extremely sharp cutting edges on the Electronic Super Knips are protected against bumping into each other after cutting by the micro cutting edge misalignment. It is therefore clear that these pliers with their multi-component grips will sit comfortably in the hand for a long time.