Knipex 1000V Diagonal Cutter - 160mm Long for Cutting Soft Material Small Bevel

Note: eBay's compatibility table is not accurate in some cases. Please refer to the following information we have provided for you.

Copyright © 2014 - 2023 Superspares. All rights reserved.

Contents : Knipex Diagonal Cutter

• The indispensable diagonal cutter for all-round use
• High-quality material and precise workmanship for long service life
• Precision cutting edges for soft material
• Clean cutting of thin copper wires, also at the cutting edge tips
• Cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC
• Narrow head style for use in confined areas
• VDE-tested safety up to 1000 volts
• With elongated cutting edge
• With small bevel
• Vanadium electric steel, forged, multi stage oil-hardened

• Pliers : chrome-plated
• Head : chrome-plated
• Handles : insulated with multi-component grips, VDE-tested
• Weight : 216 g
• Dimensions : 160 x 55 x 20 mm
• Standard : DIN ISO 5749 DIN EN 60900 IEC 60900
• REACH compliant : does not contain SVHC
• RoHS compliant : not applicable
• Cutting capacities soft wire (diameter) : Ø 4.0 mm
• VDE tested : yes

The special, chrome-plated diagonal cutters, 160 mm long

Optimised for the craftsman's everyday work and insulated up to 1000 V

Long appreciated by many craftsmen - the insulated Knipex diagonal cutters with a length of 160 mm are a classic in the Knipex range.

From the shape of the head through to the polish and hardness of the cutting edges, it is customised for the diverse cutting tasks in the day-to-day work of electricians, mechatronics engineers and electronics engineers.

The Knipex diagonal cutters are insulated using multi-component grips in accordance with the insulation standard IEC 60900 / DIN EN 60900.

For flush cutting

With their cutting capacities of up to Ø 4.0 mm on soft wire (e.g. copper wire), the Knipex diagonal cutters offer a broad range of applications. The long cutting edges make them ideal for cutting cable.

The extremely carefully and precisely machined cutting edges enable even very fine stranded wire to be cut accurately - up to the tips of the cutting edges. This is a great advantage where space is restricted, for example when shortening fine stranded wires in junction boxes.

Tough and durable

We forge the Knipex diagonal cutters from vanadium electric steel and make them strong by warming them and then quenching them in oil. To achieve a permanently accurate cut we additionally use high-frequency current to give the cutters a hardness of approx. 62 HRC.

Chrome plating is effective rust protection that pays off during outdoor use, for example. Thanks to the chrome plating, the diagonal cutters are particularly easy to clean.