Knipex 1000V Alligator Water Pump Plier 250mm with Multi-component Grips Handles

Note: eBay's compatibility table is not accurate in some cases. Please refer to the following information we have provided for you.

Copyright © 2014 - 2023 Superspares. All rights reserved.

Contents : Knipex Water Pump Plier

• Good access to the workpiece due to slim size of head and joint area
• More output and comfort compared to conventional water pump pliers of the same length: 9-notch adjustment positioning for 30 % more gripping capacity
• Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required
• Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping
• Box-joint design for high stability due to double guide
• Robust construction, insensitive to dirt; particularly suitable for outdoor work
• Pinch guard prevents operators' fingers being pinched
• Chrome vanadium electric steel, forged, multi stage oil-hardened

• Pliers : chrome-plated
• Head : chrome-plated
• Handles : insulated with multi-component grips, VDE-tested
• Weight : 374 g
• Dimensions : 250 x 73 x 28 mm
• Standard : DIN ISO 8976 DIN EN 60900 IEC 60900
• REACH compliant : does not contain SVHC
• RoHS compliant : not applicable
• Adjustment positions : 9
• Capacity for pipes, inches (diameter) : Ø 2 Inch
• Capacities for nuts : 46 mm
• Capacities for pipes (diameter) : Ø 50 mm
• VDE tested : yes

Energy-saving, tough and slim water pump pliers

Full torque on round parts and nuts thanks to self-locking effect

After gripping into the work piece, the Knipex Alligator holds onto pipes and nuts under load by itself. This self-locking effect is possible thanks to the special jaw geometry developed by Knipex. The user does not need to press the handles together, but can convert all energy directly into torque. This feature pays off in particular when loosening bolted connections that have become stuck.

Compact design - big gripping capacity

As compact as these pliers are, the possible grip widths are surprisingly large due to the 9-step locking adjustment: round parts up to 50 mm (2 inches) and nuts up to 46 mm, which is 30% more than with standard water pump pliers of the same size. With the non-slip multi-component grips that insulate up to 1000 volts, the Knipex Alligator water pump plier is ideal for electricians working on electrical installations and - with the right training - even for work on live parts.

Stable and wear-resistant - thanks to the chrome plating also when used outside

The Knipex Alligator with its box joint design and double guide offers very high stability for professional use. The teeth on the gripping surfaces have been induction hardened to approx. 61 HRC. This guarantees a very long tool life with an ever "biting" hold on the component. The Knipex Alligator is sturdily built, easy to clean and thus an ideal tool for working outdoors. In this water pump plier version, the Knipex Alligator is chrome-plated. The chrome plating protects the pliers from rust, for example if they are kept permanently in the vehicle of the craftsman where condensation may arise due to changing temperatures. In accordance with IEC 60900 (DIN EN 60900), they are suitable for work on live parts up to 1000 V- subject to the fitter having the required certification.