Heater Hose 14 x 853mm for Holden Commodore VR 3.8L V6 OHV 12V 07/1993-04/1995

Note: eBay's compatibility table is not accurate in some cases. Please refer to the following information we have provided for you.
Copyright © 2014 - 2024 Superspares. All rights reserved.

Suit:

Heater hoses are used to transfer the excess heat, in the form of engine coolant, from the engine into the heater core. Once the heated engine coolant reaches the heater core, it travels through small tubes inside the heater core.Then, the heater fan blows on the tubes, sending warm air through the heating vents and into your vehicle. The heater hoses will then transfer the heated engine coolant out of the heater core and back to the engine.

Features: Excellent resistance to high temperatures contact High quality connection and durable Tough construction for burst protection

When you replace the water pump When you replace the thermostat Every four years of average driving Anytime you notice leakage or damage

Pay special attention to hoses that have been in operation for four or more years. Hose failures increase dramatically after that period .The best advice is to suggest replacement every four years for most vehicles. Vehicles operating under severe conditions may require more frequent replacements. And remember, to prevent the risk of hose failure We recommends that if you are replacing one hose, that you should change all major cooling system hose at the same time.