Make 4 payments of $207.74 over 8 weeks and get it now!
 |
|
 |
RAW 4x4 have designed and developed a complete range of heavy duty suspension equipment to survive the toughest of conditions.If you are considering fitting aftermarket accessories, traveling prolonged periods on corrugated tracks or just want to improve the performance of your 4WD you need to upgrade your suspension. |
|
 |
|
RAW NITRO |
|
 |
|
| KING coil spring is designed that the first three laps are 19mm and last four laps are 21mm.And the gap between two laps has been adjusted.To ensure the comfort of normal running,the gap between first three laps is much smaller.The gap between last four laps is bigger,which is designed to keep more stable and better support force when encounters accelerated speed and drastic jolt. |  |
|
KING COIL SPRING |
|
|
 |
|
MATCHED RAISED LEAF SPRINGS |
|
| Polyurethane Bushes have an elastomer rating of 80 Duro to give improved suppleness & grease channels for increased distribution of lubrication. |  |
|
URETHANE SHACKLE BUSHING KIT |
|
| Powder coasted for protection against corrosion & made from quality carbonsteels with rolled threads to increase strength, due to a uniform grain finish.Deep nuts are supplied for safety & strength with flat washers to provide a smooth contact surface area to reduce plate friction. |  |
|
U BOLTS KIT |
|
When lifting IFS Vehicles, the Constant Velocity (CV) joints are put on an increased angle. This increased angle of the CV joint during operation can accelerate the wear on the joint, as well as putting additional stress on the CV boots leading to splitting and eventually premature failure of the CV. This wear is accelerated further if larger (wider) wheels and tyres are fitted.The IFS Diff Drop Kits are application specific and supplied complete to get the job done. The bolt on kit corrects the geometry on the front driveshaft and CV's, lowering the front diff by approx. 25mm, thus reducing the angles the CV joints need to operate on, and avoiding the expensive replacements of CV's and boots. Allows the bash plate to be refitted.
|
 |
|
TORSION BAR |
|
  |
Note: eBay's compatibility table is not accurate in some cases. Please refer to the following information we have provided for you.
Copyright © 2014 - 2024 Spareszone. All rights reserved.
Please note at the moment our couriers can only deliver to business addresses, if you put a residential address we'll contact you for a business address for FREIGHT items. We can get it dropped at nearby depots for collection if that is more convenient. Calculated shipping price at checkout is for Metro Brisbane, Sydney, Melbourne ONLY. If you are out of these areas either contact us for freight quote or we will call you prior to shipping for the extra freight charge.
| 50MM SUSPENSION LIFT KIT CONTENTS: |
| DESCRIPTION: | QTY |
| Front Raw Nitro Shock Absorbers - 50mm Lift | 2 pcs |
| Rear Raw Nitro Shock Absorbers - 50mm Lift |
2 pcs |
| Rear Raised KING Coil Springs | 2 pcs |
| TO SUIT: |
|
MITSUBISHI PAJERO NF NH NJ NK NL 95-00 |
$862.08
RRP $1,077.60
$1,172.95
RRP $1,407.54
$653.95
RRP $784.74
$802.95
RRP $963.54
$600.00
RRP $750.00
$676.95
RRP $812.34
$713.28
RRP $891.60
$635.52
RRP $794.40
Simple instalment plans available instantly at checkout
Use your existing debit or credit card
No long forms, instant approval online
Pay fortnightly, enjoy your purchase straight away!
All your need is:
1) An Australian Visa or Mastercard debit/credit card;
2) To be over 18 years of age;
3) To live in Australia
To see Afterpay's complete terms, visit https://www.afterpay.com.au/terms
© 2024 Afterpay
