1 x CRC F2 Multi Purpose Contact Adhesive 500ml High Performance Bond Strength

Note: eBay's compatibility table is not accurate in some cases. Please refer to the following information we have provided for you.

Copyright © 2014 - 2024 Superspares. All rights reserved.

Contents : 1 x CRC F2 Multi Purpose Contact Adhesive 500ml

Parameters:

Appearance: VISCOUS YELLOW LIQUID
Country of Manufacture: New Zealand
Flammability: Highly flammable
Flash Point: < 0°C
Unit Depth (mm): 110
Unit Dimensions: 81H 110W 110D mm
Unit Height (mm): 81
Unit Size: 500ml
Unit Width (mm): 110

	CRC F2 is a high performance general purpose contact adhesive. It is water resistant and flexible and its high bond strength makes it ideal for a wide range of uses. CRC F2 is easily applied highly versatile, durable and bonds instantly to most substrates.

Applications: Use a brush or roller. Apply a thin, even layer of adhesive to both surfaces; brushing in short, quick strokes. Between 10-20 minutes, the solvent should have evaporated and the adhesive should be tacky enough to bond the surfaces together. A useful indication is to touch the surfaces (all over) with a clean finger: if they are sticky to the touch, without transferring to your finger, they are ready to bond together. It is imperative that no solvent is trapped between the bond. Position components accurately, as when contact is made, the bond will be immediate. Apply maximum overall instant pressure, taking care to expel any air bubbles, to ensure a complete bond. Use of a hand pressure roller, e.g. a vinyl-flooring roller, provides good direct pressure. An alternative method is heat reactivation to 80¡ãC. In this case, care must be taken to ensure that all solvent has evaporated before heating.

Versatile ¨C Multipurpose High bond strength ¨C Bonds most materials and substrates. Water resistant / Flexible ¨C Ideal for a wide variety of uses. Easy to use, no clamping required.

In 1958, CRC began in a Pennsylvania garage as Corrosion Reaction Consultants, introducing its first product: CRC Corrosion Inhibitor, a multi-purpose lubricant. By 1969, manufacturing had commenced in Australia, and in 1973, operations began in New Zealand. We pride ourselves as being the leader in product quality, performance and regulatory compliance. Our innovative research and development team continually develops new and improved products to help you do your job faster, easier and safer.